Plantronics Voyager 510 Bluetooth Headset Manuel d'utilisateur télécharger pdf (Page 19)

TROUBLESHOOTING

PROBLEM

I plugged everything in but the lights won’t come on.

Possible Cause Solution

No power Check that the AC Power Adapter is connected

to the base unit.

Check that the AC Power Adapter is connected

to the mains supply.

Check that the AC Power Adapter is the model

supplied by Plantronics.

PROBLEM

My headset does not work with the base unit.

Possible Cause Solution

Headset is turned off Turn it on by pressing in and holding the Power/

Mute Button for approximately 3 seconds, until

the Status Indicator flashes blue.

Pairing lost Pair the headset to the base following the

instructions in the section PAIRING.

PROBLEM

I cannot hear caller/dial tone.

Possible Cause Solution

Headset System is not Check that the telephone is connected to the base

connected correctly unit’s Telephone Cable Port.

Check that the handset is connected to the base

unit’s Handset Cable Port.

Out of Range Walk back into range.

Headset battery is flat Recharge the battery by placing the headset

in the Headset Docking Cradle.

Listen volume too low Adjust the Listen Volume control on the headset.

If the volume is still too low, select another Rx Slide

Switch setting as described on page 10.

Incorrect Configuration Try other Configuration Dial settings on the base unit.

Dial setting for your

telephone

1 2 ... 14 15 16 17 18 19 20 21 22

Pas de commentaire

Plantronics Voyager 510 Bluetooth Headset Manuel d'utilisateur Page 19