Plantronics CS55 Series Manuel d'utilisateur télécharger pdf (Page 9)

Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538

Press Call

Control Button

5. If you do not hear a dial tone, the Lifter may not be raising the handset high enough OR the

Con guration Dial may need adjusting. Continue to step 6.

6. Check the Lifter height adjustment by moving the Lifter Height Switch to a

higher position. Repeat steps 2 through 4 as necessary.

If you hear a dial tone, the lifter height is now set correctly. Please continue with

the next section “Mount the Lifter in Permanent Position”.

7. If you still cannot hear a dial tone, you will need to change the setting

on the Con guration Dial. Using a coin or paperclip, turn the Con guration

Dial to a di erent setting until you hear a dial tone.

To view an interactive quick start guide online,

visit www.plantronics.com/CS55.

Con guration

Dial

Position Indicator

1. Remove the protective strips from the three mounting tapes on the underside of the Lifter.

2. GENTLY place the Lifter on the desk phone in the optimum position as determined above.

Test the Lifter to verify positioning by pressing the Call Control Button on your headset to

activate the Lifter and listen for a dial tone.

3. Press FIRMLY to adhere the Lifter to the desk phone.

C. Mount the Lifter in permanent position

Multiple settings might work with your phone; however, only one is the

optimal position.

4. Press the Call Control Button on the headset. This will activate the Handset Lifter

and lift the handset from the phone.

If you hear a dial tone, the lifter height is set correctly and

needs no adjustment. Please continue with the next

section “Mount the Lifter in permanent position”

on the following page.

If you still cannot hear a dial tone, please call Technical Support at 800-544-4660

Extension 5538.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Plantronics CS55 Series Manuel d'utilisateur Page 9