Plantronics Savi Office WO350 Manuel d'utilisateur télécharger pdf (Page 10)

Plantronics Savi User Guide 10

5 Lifter set-up (optional)

5.1 Installing lifter

5.2 If you do not hear a dial tone

1 If you do not hear a dial tone, raise the lifter height

switch to the next highest position.

1 Firmly press the handset lifter power cord into the hand-

set lifter jack.

2 While wearing your headset, slide the handset lifter arm

under the handset until the lifter base touches the side

of the phone.

3 Slide the lifter up to where it nearly touches the handset

earpiece.

7 Gently place the lifter on the desk phone in the

pre-determined position.

8 Press ﬁrmly to adhere.

Handset lifter

power cord

2 Repeat Steps 2 to 5 in Section 5.1 as necessary until you

hear a dial tone.

3 When you hear a dial tone, secure the lifter as described

in Steps 6 to 8.

4 Press the call control button on your headset to activate

the lifter.

5 If you hear a dial tone, the lifter is set correctly and

needs no adjustment.

6 Remove the protective strips from the 3 mounting tapes

on the underside of the lifter.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Pas de commentaire

Plantronics Savi Office WO350 Manuel d'utilisateur Page 10